Pallet racking is useful in basically every warehouse and storage area. It makes up the lifeblood of the storage industry, and without good racking, a warehouse cannot make money. This is why it’s so important that you take good care of your pallet racks. One of the best steps to racking care is frequent and regular inspections of the racking. To run a proper inspection, you first should know what a pallet racking inspection includes.
Area Check
To start every inspection, you should create a checklist of everything that you need to inspect. Start with the area around the racking. You should see if there are any obstructions or hazards, such as wet floors, and clear these problems away immediately. You also want to check lighting levels to make sure you have enough light for safe work.
Rack Condition
Once the surrounding environment is optimal, you should check the racking itself. You’re looking for any signs of damage to the racking, such as dents or worn joints, that can cause racking failure. Check the loads on each rack as well to ensure they are safely stored without overloading the racking.
Rack Supports
You should then go on to check the supports that ensure the racking’s safety and anchor it in place. Things like braces or beams are important to racking safety, and you should check them for any damage or wear to make sure your racks are safe for use.
Check Safety
The final part of the inspection should include a check on the safety around the racking. Check to see if the racking is easy to access or if the proper safety equipment for the racks is in place. You want your racking to be as safe as possible to lower the risk of worker injury.
Now that you know what a pallet racking inspection includes, you can see that it takes a lot of time and resources to properly check every piece of racking you have. This is why it can be so beneficial to use a pallet racking safety inspection service to speed up the process and free up your worker’s time and energy for their other tasks.
